Photo may contain optional equipment.
Available Sizes
| 8’-6” length |
| 9’-4” length |
| 11’-4” length |
Design Features & Hardware
| All steel frame construction |
| 4” steel channel frame rails |
| 3" steel roll-formed 3/16" channel crossmembers |
| 1/8” smooth deck |
| Full length side skirt with rolled fenders |
| 2 – lockable flush-mounted tool boxes, 1 per side, located in front of wheel well |
| Full length rear skirt |
| Full access receiver mount |
| 34” trough in front w/ 3” step down |
| 1.66" pipe around bottom rim of sides and back |
| 1/8" steel straight back |
| 3 ½” v-groove across back |
| Premium TGIC Polyester powdercoating: black |
Lights
| Stop, turn, tail, back up, and tag lights in skirt |
| DOT required lighting (clearance and marker lights) |
| All lighting must be wired to meet all DOT requirements as originally intended by the vehicle manufacturer |
Fender Wells
| Due to various chassis lengths and configurations, specific measurements may determine the fender well placement on skirted beds (i.e. 2003 Dodge is 58” cab to axle measurement, whereas Ford and Chevy are 56” on bed off models) |
CM Truck Beds reserves the right to make any change in paint, design, or construction as necessary for engineering. All visual representation, specification, and dimensions are based on the latest product information available at the time of publication. Some of the equipment shown or described is available at extra cost. At no time will any of the material or information contained in this publication have any justifications for resolving disputes.
|
